Altec ATP-30 Windows Printer Drivers

10.6.26

• The Printer installation wizard properly responds the installation status to the Control Center application.

10.6.24

• Not Accessible status is now returned when querying for status when printer is not connected.
• Prninst will no longer show empty list of ports when user asked for port selection.
• All printers get updated after Windows upgrade and no longer produce errors when opening print preferences dialog.

10.6.21

• When installing fonts on a Windows system with the German language setting, they were not listed in the Driver Settings under Font Download. This is fixed now.

10.6.15

• When user creates port with non-English letters in its name, port was not automatically selected. This is fixed now in the installation utility.

10.6.14

• Passthrough mode is supported and can be enabled on print options.
• Installation of one printer model also updates other printer models when using Microsoft installers.

10.6.12

• Added back translations for printer status (job status in print spooler, enhanced status checking from application).
• Fixed driver installation crash on Windows Server Datacenter environments.
• An issue with some of the True Type fonts not being shown in the download dialog has been solved.
• Printing from Microsoft Universal Print Connector is working now.

10.6.11

• Fixed simultaneous printing and status checking which caused the printer spooler to stop working.

10.6.10

• Fixed the issue of stopping printing due to "No connection" error when printing on multiple printers simultaneously.

10.6.9

• The installation of a network printer has been corrected, ensuring that the network port number is now correctly set.
• Adding an existing printer model to a different port no longer causes the printer installation to fail.
• Minimized usage of memory consumption in the Print Spooler windows service.

10.6.8

• Unidirectional printer drivers are now installed on LAN port without error message.
• Fixed installation issue preventing printers being installed on USB port.
• Printer network discovery now works on servers with multiple network adapters.
• Corrected driver update procedure, no longer removing printers that do not match case sensitive printer name.

10.6.7

• Printer installation wizard now shows correct port choices when installing the driver.

10.6.6

• Stabilized driver Port monitor and Language monitor memory consumption.
• Stabilized memory consumption in the windows environment when sending data to printer.
• Redesigned installation process in the installation utility wizard. Added logging functionality to the installation utility.

10.6.0

• Update port monitor functionality to prevent possible memory consumption.
• This is initial release of Loftware printer driver, rebrand from NiceLabel printer driver family.

10.5.2

• Driver core stabilization by improving memory and heap allocations.
• Redesigned the self extracting driver package users download from the internet web page.
• Stabilized driver's communication component.

10.5.0

• Corrected status response when multiple status queries are requested at the same time.
• Printer options resolution, darkness and speed are now correctly merged when changing printer models.
• Stabilized communication interface between the driver and the Label Design application.
• Removed limitation of loaded driver packages on Server 2008 and Server 2016 system.

10.2.4

• Improved functionality of Stop on last element option, which effects on printing length in case of continuous print mode.

10.2.2

• Fixed crash of driver when document name longer than 260 characters

10.0.3

• Additional options added to stock dialog. This distribution supports just latest Altec printer models. Legacy models can be found in Altec legacy distribution.

10.0.0

• Fixed problems in case user set different HDPI and VDPI in landscape orientation.
• Menu for using settings from printer or driver is redesigned and improved.
• Added capability to set all printer supported parameters to be controlled by the printer.
• Added support for web based printer management.
• Change the print preview so when the label is too long the end of the label is visible.

8.6.3

• Driver is signed with updated certificate. Changed timestamp server to avoid "unknown certificate" issue on some OS systems.

8.5.0

• Communication with the printer is working now also when port monitor logging is enabled on non English Windows OS. Fixed issue with top offset moving the printout in the wrong direction. Altec ATP-3000 printer is supported.

8.3.1

• Improved performance Driver initialisation time was decreased for up to 30%.Smaller file footprint Driver file size was reduced for up to 60%.Improved installation utility PrnInst better supports multi user environments. Driver upgrade procedure was improved for installations with large number of printers.

8.2.0

• Driver stability was improved and memory usage was optimized.

8.0.50

• User can now use Reload to upload entire list of virtual fonts to printer again, instead uploading each virtual font individually.
• Procedure for updating printers is improved in Prninst application that all settings for all users are correctly preserved.
• Prninst application automatically detects printer(s) connected to local network.

8.0.22

• Fixed print spooler crash using latest driver's language monitor.
• GS1 128 code is supported with native command on TSPL printers.

8.0.21

• Driver Maintenance, Settings and Support actions are working also with printer name longer than 32 characters.

8.0.20

• Initial Version 8 release: Redesigned and updated User Interface. Added and improved Print Preview to be shown on more panels. Added new Tool options for easier Maintenance, Setup and Support. Added options for sending files or commands to the printer. Added possibility to toggle Status Checking during printing. Fixed in-corrections when displaying driver on High-DPI monitors.
• During printer driver installation and uninstallation the Unicode printer names are fully supported.
• Improved displaying of Network discovered printers while sorting and graying already installed printers during printer driver installation.
• Minimized the frequency of displaying the splwow64 thunking spooler (SplWow64) message during printer installation.
• Upgraded uninstall of Ports and Port Monitors when printer removing the printer driver.
• During printer driver installation additional fields Location and Comment can be set.

7.8.30

• Improved status checking from NiceLabel to show the latest possible value.
• Improved Advanced TCP/IP port stability and information when logging is enabled.
• Button "Open printing preferences" is added to the last installation page. By clicking on this button installer opens printing preferences of recently installed printer.

7.8.22

• Unprintable area behaviour and backward compatibility was corrected.

7.8.01

• Print Test Page button functionality was improved.
• "Test print" button is added to driver's properties dialog. It prints test label to help user adjust printer settings correctly.

7.3.80

• New option in GUI added: add custom commands.

7.3.70

• Date/Time in NiceLabel was always forced to use internal printer clock, even if current font does not support it.

7.3.60

• Installation of 32bit driver for sharing printer on 64bit OS has failed. This is corrected now.

7.3.01

• Some TSPL printer models can print also on very small labels, so minimum label height is now set to 3mm and not 10mm.

7.0.04

• This is completely new driver release, based on new driver platform. The driver was extensively tested with different NiceLabel software versions. We suggest that you verify existing labels and solutions before you start using this printer driver in production.