Macsa Windows Printer Drivers

LATEST VERSION 10.5.0September 1, 2023

Macsa

Download Loftware’s Free Macsa Printer Driver to print from any Windows application. Optimize printer performance by using Loftware NiceLabel or Spectrum to design your bar code and RFID labels and tags and your coding and marking messages easily, ready to print.

Enter your information to download Macsa printer driver

Version

September 1, 2023

10.5.0

Read release notes

Supported printers

See all supported printers

Installation guides

English

Tested on

Windows 8.1 | 10 | 11 | 8.1 | 10 | 11

Windows Server 2012 R2 | 2016 | 2019 | 2022 | 2012 R2 | 2016 | 2019 | 2022

Release Notes

10.5.0

  • Added support for requesting multiple status queries at the same time.
  • Printer options resolution, darkness and speed are now correctly merged when changing printer models.
  • Stabilized communication interface between the driver and the Label Design application.
  • Removed limitation of loaded driver packages on Server 2008 and Server 2016 system.

Supported Printers

Macsa D-5010 YAG (L/MK2)

Macsa D-5020 YAG (L/MK2)

Macsa D-5100/5060 YAG

Macsa F-9000 pulsed/NanoF

Macsa F-9000 cw

Macsa D-5000 B1 series/NanoD

Macsa T-3000

Macsa S-3000

Macsa KIP-70

Macsa KIP-80

Macsa K-1080

Macsa Standard CO2 K-1010

Macsa Standard CO2 K-1030

Macsa 100 Watt CO2 Normal

Macsa 100 Watt CO2 Pulsed

Macsa D-5005 YAG (L/MK2)

Release Notes

10.5.0

  • Added support for requesting multiple status queries at the same time.
  • Printer options resolution, darkness and speed are now correctly merged when changing printer models.
  • Stabilized communication interface between the driver and the Label Design application.
  • Removed limitation of loaded driver packages on Server 2008 and Server 2016 system.

10.2.2

  • Fixed crash of driver when document name longer than 260 characters

10.1.x

  • When printing to Masca printer, the label design is not selected for printing. This is fixed now.

10.0.0

  • Fixed problems in case user set different HDPI and VDPI in landscape orientation.
  • Menu for using settings from printer or driver is redesigned and improved.
  • Added capability to set all printer supported parameters to be controlled by the printer.
  • Added support for web based printer management.
  • Change the print preview so when the label is too long the end of the label is visible.

8.5.0

  • Communication with the printer is working now also when port monitor logging is enabled on non English Windows OS.

8.3.1

  • Improved performance Driver initialisation time was decreased for up to 30%.Smaller file footprint Driver file size was reduced for up to 60%.Improved installation utility PrnInst better supports multi user environments. Driver upgrade procedure was improved for installations with large number of printers.

8.2.0

  • Driver stability was improved and memory usage was optimized.

8.0.50

  • User can now use Reload to upload entire list of virtual fonts to printer again, instead uploading each virtual font individually.
  • Procedure for updating printers is improved in Prninst application that all settings for all users are correctly preserved.
  • Prninst application automatically detects printer(s) connected to local network.

8.0.22

  • Fixed print spooler crash using latest driver's language monitor.
  • Added concatenation support for all elements on laser printers using NiceLabel Designer 2017 and later.
  • Support for alignment on text elements has been added for laser printers.

8.0.21

  • Driver Maintenance, Settings and Support actions are working also with printer name longer than 32 characters.

8.0.20

  • Initial Version 8 release: Redesigned and updated User Interface. Added and improved Print Preview to be shown on more panels. Added new Tool options for easier Maintenance, Setup and Support. Added options for sending files or commands to the printer. Added possibility to toggle Status Checking during printing. Fixed in-corrections when displaying driver on High-DPI monitors.
  • During printer driver installation and uninstallation the Unicode printer names are fully supported.
  • Improved displaying of Network discovered printers while sorting and graying already installed printers during printer driver installation.
  • Minimized the frequency of displaying the splwow64 thunking spooler (SplWow64) message during printer installation.
  • Upgraded uninstall of Ports and Port Monitors when printer removing the printer driver.
  • During printer driver installation additional fields Location and Comment can be set.

7.8.40

  • Contextual shaping is enabled also for unicode arabic font.
  • Two additional pen settings on the hatching dialog tab were added.
  • Three additional printer fonts are supported.

7.8.30

  • Improved status checking from NiceLabel to show the latest possible value.
  • Improved Advanced TCP/IP port stability and information when logging is enabled.
  • Button "Open printing preferences" is added to the last installation page. By clicking on this button installer opens printing preferences of recently installed printer.

7.8.10

  • Counter element is supported.

7.0.03

  • Unit "system default" is no longer available as one of the possible measurement units on driver's GUI. Therefore all labels stored with "system default" unit will be opened with measurement unit set to cm.
  • Port monitor on second print has crashed print spooler when using Advanced TCP/IP. This is fixed now..

6.0.17

  • If counter variables are not internal will not be present in recall stream.
  • CE characters are not printed if used as prefix/suffix.
  • Fixed driver crashes occurring on labels with empty variable elements .
  • Incorrect value is retrieved during recall when there are elements with same variable contents.
  • Unicode contents are now correctly handled in bar codes that support multiple code pages.
  • Merging settings between printers with different "Use printer default" settings didn`t work.

6.0.16

  • Exporting printer settings as non administrator user doesn`t work.
  • Graphics optimization was improved and combined with stripping empty space around graphics.
  • Cut every label functionality is now working as expected when using Crystal Report application.

{"6.0.16":{"testedOnPlatforms":{"Windows":"8.1 | 10 | Vista | 7 | 8","Windows Server":"2012 R2 | 2008 | 2008 R2 | 2012"},"version":"6.0.16","date":"October 16, 2015"},"7.0.4":{"testedOnPlatforms":{"Windows":"8.1 | 10 | Vista | 7 | 8","Windows Server":"2012 R2 | 2016 | 2019 | 2008 | 2008 R2 | 2012"},"version":"7.0.4","date":"July 18, 2016"},"7.8.10":{"testedOnPlatforms":{"Windows":"8.1 | 10 | Vista | 7 | 8","Windows Server":"2012 R2 | 2016 | 2019 | 2008 | 2008 R2 | 2012"},"version":"7.8.10","date":"June 21, 2018"},"7.8.30":{"testedOnPlatforms":{"Windows":"8.1 | 10 | Vista | 7 | 8","Windows Server":"2012 R2 | 2016 | 2019 | 2008 | 2008 R2 | 2012"},"version":"7.8.30","date":"September 27, 2018"},"7.8.40":{"testedOnPlatforms":{"Windows":"8.1 | 10 | Vista | 7 | 8","Windows Server":"2012 R2 | 2016 | 2019 | 2008 | 2008 R2 | 2012"},"version":"7.8.40","date":"December 19, 2018"},"8.0.20":{"testedOnPlatforms":{"Windows":"8.1 | 10 | Vista | 7 | 8","Windows Server":"2012 R2 | 2016 | 2019 | 2008 | 2008 R2 | 2012"},"version":"8.0.20","date":"May 15, 2019"},"8.0.21":{"testedOnPlatforms":{"Windows":"8.1 | 10 | Vista | 7 | 8","Windows Server":"2012 R2 | 2016 | 2019 | 2008 | 2008 R2 | 2012"},"version":"8.0.21","date":"June 16, 2019"},"8.0.22":{"testedOnPlatforms":{"Windows":"8.1 | 10 | Vista | 7 | 8","Windows Server":"2012 R2 | 2016 | 2019 | 2008 | 2008 R2 | 2012"},"version":"8.0.22","date":"July 12, 2019"},"8.2.0":{"testedOnPlatforms":{"Windows":"8.1 | 10 | Vista | 7 | 8","Windows Server":"2012 R2 | 2016 | 2019 | 2008 | 2008 R2 | 2012"},"version":"8.2.0","date":"December 13, 2019"},"8.3.1":{"testedOnPlatforms":{"Windows":"8.1 | 10 | 8","Windows Server":"2012 R2 | 2016 | 2019 | 2008 | 2008 R2 | 2012"},"version":"8.3.1","date":"May 29, 2020"},"8.5.0":{"testedOnPlatforms":{"Windows":"8.1 | 10","Windows Server":"2012 R2 | 2016 | 2019"},"version":"8.5.0","date":"November 8, 2020"},"10.0.0":{"testedOnPlatforms":{"Windows":"8.1 | 10 | 11","Windows Server":"2012 R2 | 2016 | 2019 | 2022"},"version":"10.0.0","date":"September 30, 2021"}}

Select version & enter your information to download Macsa printer driver

Version

September 1, 2023

10.5.0

Installation guides

English

Tested on

Windows 8.1 | 10 | 11 | 8.1 | 10 | 11

Windows Server 2012 R2 | 2016 | 2019 | 2022 | 2012 R2 | 2016 | 2019 | 2022

Supported Printers

Macsa D-5010 YAG (L/MK2)

Macsa D-5020 YAG (L/MK2)

Macsa D-5100/5060 YAG

Macsa F-9000 pulsed/NanoF

Macsa F-9000 cw

Macsa D-5000 B1 series/NanoD

Macsa T-3000

Macsa S-3000

Macsa KIP-70

Macsa KIP-80

Macsa K-1080

Macsa Standard CO2 K-1010

Macsa Standard CO2 K-1030

Macsa 100 Watt CO2 Normal

Macsa 100 Watt CO2 Pulsed

Macsa D-5005 YAG (L/MK2)