WASP Windows Printer Drivers

4.6.78

• In some rare cases driver crashed when printing a Code128 barcode. This is corrected now.

4.6.76

• Maximum expansion for QR barcode is greater then 10 which was previous limitation. It is set to 99 now for TSPL printers.
• Fixed occasional Spooler crash when printing Word document with very long filename.
• Advanced Port monitor can now be added by using Windows Add New Port Type option.
• Port monitor now reconnectes to printer after lost connection

4.6.74

• Numeric GS1Databar barcode types no longer have data size requirements

4.6.69

• Driver update didn't preserve settings for all installed printers. This is fixed now.

4.6.66

• In some case of printing big graphics (color on 64-bit OS for example) the graphic elements could be missing. This is corrected now.
• Obsolete monitor.inf files were removed from drivers that still had them
• Removed warning message for special ports, when installing printer driver with Printer Installation Wizard.If connected to standard Windows TCP/IP port then show warning message.

4.6.65

• Added safe graphic printing option as a solution to graphics printing over each other on TSPL printers.
• Printer error detailes were missing while printing. The status reporting issue was limited to NicePrintQueue, Enterprise Print Manager(EPM) and NiceLabel.:p

4.6.64

• Advanced TCP/IP port monitor now supports connections to names as well as IP addresses.

4.6.63

• Rotation option on userinterface and QR and MicroQR barcode font rotation now work correctly

4.6.62

• Spooler crash when changing printer port while printing was fixed.
• Support for PDF417, QR, MaxiCode and Datamatrix barcode added.
• Custom settings for unprintable now work correctly

4.6.59

• Printer ports are now properly shown in Options dialog.
• Changed font for Chinese Windows to SimHei.

4.6.51

• Czech, Lithuanian and Ukrainian languages are now supported also in all NiceDrivers.

4.6.50

• When printing from standard Windows application (like Microsoft Word) and using page rotation (Landscape and/or rotate 180), positions of graphic were shifted relative to internal elements.Shift size depends on page dimensions, shift direction depends on rotation.

4.6.49

• PrnInst utility was updated so that long INF file structure is supported.
• When trying to preinstall drivers on Windows 7, user got an "Environment incorrect" error message. This is corrected now.

4.6.46

• Fixed issue with labels designed wider then maximum print width which could cause printer to print graphics incorrectly.

4.6.44

• Fixed problem with barcode Code39 when exporting to keyboard.
• YOffset did not work OK when it was used continuous paper type. The label was cut and printed on wrong position (too soon).X and Y offset can not be negative.

4.6.43

• Negative offset values are now sent correctly for TSC printer models.
• User is now able to change administrator settings without reopening driver properties dialog as an elevated user. A click on the shielded button and entering the credentials is all that is needed.
• There is one additional button (Run as administrator) on the printer's language dialog when current user has insufficient rights to change dialog's language.

4.6.41

• Fixed occasional driver crash when printing extremely large graphics
• Switching to PCX download now works
• Page preview icons in "Advanced Dialog" corrected.
• Correction on Advanced tab dialog for Chinese language.
• New export variants added to TSC driver.
• Printing internal clock improvement.
• Offsets sent in mm will not be sent as they were entered in driver interface
• FONT 0 added to TSC driver.

4.6.37

• Partial Cut option was not stored on Advenced setup dialog. This is corrected now.
• Uninstall of printer with Printer Install Wizard did not work on Windows 2003 (x64) system

4.6.26

• Export to printer functionality is added for TSPL printers.

4.6.22

• Build number is now part of version information in About dialog

4.6.01

• Added Rotation to parsed text in command fonts

4.6.00

• Printing process was stopped during heavy duty printing.

4.5.42

• Driver print speed optimization

4.5.39

• PrnInst showed login window, even if the user running the application was administrator.

4.5.38

• TSPL printers now support also SHIFT command which can be used to fine-tune the entire label up or down from its current position.

4.5.37

• PrnInst can now be moved to any position (second monitor) and it will stay there. It will not jump back to its original position.

4.5.34

• Postnet barcode fonts can no longer have their width changed.

4.5.12

• Partial cut option is enabled on some TSPL models. With this option the label won't back feed when it is cut off.
• User can select Automatic or Manual options for Job removing using keyboard in Printer Install Wizard
• Fixed labeling software crash when turning off "Use Advanced printer driver interface".
• There was wrong command sequance present in print stream when setting tear off/peel off/ cutter option. This is corrected now.There was added also cutter functionality of "Partial" cutter into some TSPL models.

4.5.11

• Printer Install Wizard uninstallation of driver doesn`t remove all of the files from the SYSTEM32\spool\drivers\w32x86\3\ folder.

4.5.09

• Electonic Article Survailance was always disabled on Rfid printers
• Fixed printing of Datamatrix and QR barcode font with more then 255 character data
• Added automatic termination character for Maxicode barcode font data

4.5.07

• Added support for custom printer name after silently installing a printer driver from command line (/INSTPRN; /INSTMULTPRN)

4.5.06

• Printer Installation Wizard will be able to automaticly remove all jobs when updating printer

4.5.05

• Printer Install Wizard can start an application specified in the command line, after it closes.

4.5.03

• When you disable the option "Use advanced printer driver interface" (in File -> Label Setup -> Printing tab) labeling software will crash with the error "GDI Failure, OK to continue?"
• Status monitor is able to detect port conflicts, when two printer drivers are using the same port for bidirectional communication with the printer.Also when user will delete or install a new printer to the system, Status Monitor will detect the change by itself.

4.5.02

• PrnInst didn't set printer attributes correctly. This is fixed now.

4.5.01

• Turkish language added

4.5.00

• - write MMF to alternative location (research) - update MemMaster to store files to this location - update driver to read from new location (make sure that the update will be backward compatible)

4.4.73

• Uninstall of driver package failed when running a 64bti system.

4.4.69

• Labelling software can now recall variables with more than 31 characters of data.
• When you click on the Help button in About dialog help is opened, but it is not linked to any page.
• Help on About dialog opens help page with contents 'This program cannot display the webpage'.
• Checkbox "Enable bidirectional support" (Printer properties -> Ports) can now be unchecked automatically during driver installation, corresponding to the flag "Bidirectional" in .inf file.Bidirectional=0 => checkbox is unchecked.Bidirectional=1 => checkbox is checked.If this information is ommited, Bidirectional=1 is assumed.

4.4.64

• Removed Help button as no help is available.
• New Japanese translation for Printer Install Wizard

4.4.63

• When user starts Printer Install Wizard the application is shown but without focus
• Changed default number for cutting to 1 label instead of 0.

4.4.60

• Changed file info for Printer Install Wizard
• Default value for Always use default settings is not correct when instaling it the driver with a configuration file attached.
• Nice Drivers support new printer family:WASP.Supported models:WPL-606WPL-305WPL-205WPL-303WPL-604WPL-610

4.4.52

• DLL files for user interface translation did not include version info data.
• Labels transfered from different systems now retain their driver settings.

4.4.51

• Increased lenght for filename and path in import and export of settings.
• POSTNET barcodes have a fixed height and width, but the interface allows the user to change these dimensions.

4.4.50

• Import and export didn't work if filename and path exceeded the length of 80 characters while windows support 256 character lengths
• Click on "Stocks" panel caused error if stock list was empty. This is fixed now.

4.4.30

• - support for preinstall on all supported platforms

4.4.01

• EndDocument escape was sent even when there was no StartDocument.
• If driver gets no separator character description for decimal number from the OS, driver puts a "+" or "," string as default character. The result was seen for page size (example)Now the dot character "." is set for default separator in this case.